How To Solve Technical Problems With Your Vape

Vaping has become quite the trend recently for myriad reasons. For one, plenty of people are now looking to rid themselves of the vice of smoking, but secondly, it’s become a culture in its own right. With a huge selection of devices to choose from, you are almost guaranteed to get one you enjoy. However, once you’ve tried the more diminutive options and discovered you like them, there will come a time when you will choose to upgrade to a more sophisticated one. As is the case with anything, the more complicated things become, the more likely something could go wrong. This is also true with vaping devices, but with a little technical nous, and a willingness to learn how to keep it in tip-top condition, you can power through any issues you might face and keep your vaping hobby alive for the foreseeable future.

Check The Battery Connection

Because these devices use electricity to function, the most likely issue you will run into is something to do with the battery. It can be frustrating when your device doesn’t turn on or doesn’t produce any vapor. However, before you panic and assume the worst, check the battery connection first. But before you freak out, take a look at the battery connection. Remove it and inspect the points for debris. If they’re dirty, use a soft cloth to clean them off carefully. Reinsert the battery and see if that solves your problem. Most vaporizers use a special kind of battery called a 510 thread battery, so-called for the thread that connects the battery to the actual device, which measures 5mm and has ten threads. Therefore, if your 510 thread battery is not working, it might have a number of causes. These include:

  • Loose connection
  • The battery could be dead
  • The battery isn’t firing for whatever reason
  • There’s a short circuit occurring
  • It has dirty contacts
  • There is an incorrect voltage

In reality, any of these things (or more than one) could be the cause of your problem, requiring nothing more than a battery swap or a thorough cleaning.

Make Sure You Keep The Coil Clean And Intact

A major issue vapers face is a burnt or damaged coil, which can detract from your session and even carry potential health risks. To keep your vaping game strong, you need to stay on top of maintaining your coils. Start by cleaning them regularly with warm water – this should rid them of any gunk buildup that could cause issues down the line. Afterward, use a small brush or cotton swab to remove any remaining residue. If you notice signs of damage like frayed wires or discoloration, don’t delay in replacing the coil right away; this is key for avoiding serious safety hazards that you really don’t want to deal with when enjoying a relaxing vape!

Ensure It Has The Right Amount Of Airflow Running Through It

Without sufficient airflow, vaping can be a painful affair, to say the least! This can cause your coils to burn out and create an unpleasant taste, which is why it’s vital to ensure that air is flowing correctly through your device. If yours has adjustable airflow, adjust the settings until you find what works best for you and your e-juice. However, fixed-flow vapers may need to do some cleaning; use a cotton swab or toothbrush on any parts where air passes through to remove any buildup obstructing its flow. Once this step is complete, experiment with different settings until everything runs smoothly and vaping becomes enjoyable again!

Make Sure The Tank And Atomizer Are Securely Connected

Vaping can be an excellent experience until you’re hit with the common issue of a leaking tank or atomizer. This incredibly frustrating problem can potentially ruin your day – but it’s not unsolvable. To start, make sure both your tank and atomizer are securely locked in place. If they’re loose, tighten them up – if it still doesn’t work, then replace the O-ring seals on both components, as these often become worn out over time and cause leaks. Another possible culprit could be a faulty coil, so ensure this is adequately screwed into your atomizer before calling it quits. If you have tried everything but are still seeing leaks, physical damage might warrant a replacement device. 

Check The Atomizer Wattage And Coil Resistance

Finding the perfect wattage and resistance for your atomizer can be a tricky balancing act, but it’s essential to get a great vaping experience. Too high of wattage with too low of resistance will cause the coil to burn out quickly and give you that dreaded burnt taste. But if the wattage is too low for the resistance, dry hits are inevitable. To prevent this from happening, make sure to check what range your atomizer should be set at before use. You can typically find this in the manufacturer’s specifications, which should either come inside the box when you bought your vape or be in their online documentation.

Image source: https://unsplash.com/photos/PiHFDa8F5iY

Check The Manufacturer’s Website For Troubleshooting Tips

As per the latter piece of advice from the previous paragraph, you can always head over to the website of whatever brand you have brought and look for a section dedicated to troubleshooting. These sections are more common in vapes bought from a reputable brand rather than those purchased online from e-commerce sites such as AliExpress et al. Nevertheless, even the most basic internet sleuth should be able to discover advice on troubleshooting the most common problems via forums and the like.

Use Your Common Sense And Check It Frequently

Using your intuition and inspecting it regularly can make a huge difference. One of the most typical issues with vapes is not enough vapor production, which can usually be fixed by taking a look at the battery to confirm it’s fully charged. Similarly, if you’re getting an acrid taste, chances are that the coil needs changing. An additional key step is cleaning your vape regularly, from tank to coil and mouthpiece, to prevent clogs or any other troubles impacting performance. Furthermore, just remember to utilize the right kind of e-liquid for your vape; using one which doesn’t suit the device could cause problems like leaks.

Keeping your vape in excellent working order doesn’t take a whole lot of effort, and in most cases, you can fix a situation by applying a little common sense. Moreover, when in doubt, you can often gain a considerable amount of Information by visiting their website or crawling through discussion boards which are often full of vapes in similar situations.